High Tech Modellbahnen 7026 White LED 2 Pieces

High Tech Modellbahnen 7026 White LED 2 Pieces
High Tech Modellbahnen 7026 White LED 2 Pieces High Tech Modellbahnen 7026 White LED 2 Pieces High Tech Modellbahnen 7026 White LED 2 Pieces High Tech Modellbahnen 7026 White LED 2 Pieces
Brand: High Tech Modellbahnen
Product Code: 7026
Availability: 2-3 Weeks
Price: $61.00
   - OR -   
High Tech Modellbahnen 7026 White LED 2 Pieces
HTM 7026

This is a technical masterpiece.
 
For the first time in the Z model train world, the Swiss change of lights is reproduced correctly. Three yellow lights shining forwards, and at the same time one yellow light on the right shining backwards. When changing the running direction, the lighting is changing accordingly. On the photos you still see the prototypes, the serial products will be a bit thinner. Despite the good screening, a certain light scattering of one LED onto the two other LEDs that stay dark when going backwards is inevitable. On the board of the locomotive, the two diodes have to be bridged with a thin wire. The two thin wires are included in the delivery and can easily be soldered on with a small soldering iron and some skill. If desired, this will also be done by your local dealer.
 
The two electronic boards let the LEDs shine with a constant brightness, no matter to what regulation step the controller is tuned. Precondition is that you have a pulsed voltage or a pulse width control. Thanks to its optimal form, you can simply replace the existing bulb with this component. It fits perfectly into the space inside the locomotive. There are two thin wires coming out of the component, these have to be clamped underneath the clamps on the board like they are in the serial lighting.
 
The article comprises one set, which means always two pieces that each shine accordingly forwards and backwards. The color of the light resembles the natural white of an LED. There is not even a hint of a bluish cast. The white LED used by us has the most natural white light we could find on the LED-market. Of course these components only work if the original lighting has been working as well. The component can be used with analog running and track voltages up to 10 volt. Please note that higher voltages will at once destroy the LED or other parts of the electronics!
 
The components are only suited for the following model:
Ae 3/6

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:



Ztrack Center © 2018
contact